Heat-sealing foil lamination (foil-kraft-scrim-PE facings) is suitable for online lamination of glasswool, rockwool, mineral wool insulation. Thicker heat-sealable PE. No need applying extra adhesive. Good corrosion resistance. The scrim can be tri-way fiberglass scrim (8*10) or two-way fiberglass scrim (10*10, 6*12, 12*12).
Suitable for in-line lamination of glasswool, rockwool, mineral wool insulation.
No need applying extra adhesive.
Good corrosion resistance.
2. Typical Physical Properties
Foil-Kraft Facing / Foil-Scrim-Kraft Facing
Product
Basic Weight
(g/m2)
WVTR
ng/N.s
Tensile MD
(N/25mm)
Tensile XD
(N/25mm)
Bursting
Strength (N)
Fire Rating
FKSV-7502A
100
1.15
135
50
30
---
FKSV-7501B
100
1.15
116
75
35
---
FKSV-7602A
113
1.15
140
76
38
---
FKSV-7601B
110
1.15
132
80
38
---
IMPORTANT NOTE:
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Log Roll: ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature, kept away from wet and heat source.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
* Please kindly contact with sales staff confirm the specific specifications.